Below are your results for nixie

List view Grid view Set filters on results Remove all filters

Lamina Nixie Clock

Fully handcrafted clock with old stock of Russian Nixie vacuum tubes.

The clock is made from stained american walnut and natural maple wood in glossy lacquered finish. The high polished brass and aluminium gears and disks are custom cut pieces.

Nixie OXO board DIY Kit, round IN-7 Nixies Included

Note: This is a DIY construction kit, not a finished board. This kit will include the 9 nixie displays needed for assembly.

The first and only Nixie-powered OXO (tic-tac-toe / noughts and crosses) in the world.
No plugs, Induction coils power the pieces right through the board.
A neat desk toy which takes up much less space than our chessboard but still very playable.

Supplied with five '0' (zero) pieces and four 'X' (Plus) pieces, '0' goes first and then take turns placing pieces anywhere you want on the board, they'll light up as soon as you put them down.

Back in a new easier to build through hole part design with IN-4 and IN-7 nixies as the 'O', only 40 of this version will be made available due to the limited number of parts available. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Kit contents:

All PCBs and electronic components
4x IN7 nixies
5x IN4 nixies
10x Piece bases
Paxolin case parts and engraved board top - you'll need to fill in the engravings with a paint of your choice.
'Wall wart' power supply.

You'll need to supply sandpaper, paint for the engraved board and to colour the piece bases, basic tools including a good quality soldering iron and patience. You'll find the assembly instructions over at http://www.lasermad.com/forums/viewforum.php?f=26

Nixie Chessboard DIY Kit, IN-15 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

Finally! After many months and redesigns (Again!) our V1.6 board is ready. Now using ready-made ferrite inductors and with all-through hole assembly. Finally no more surface mount parts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-15 (oval) pieces – we also have a round IN-7 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Nixie Chessboard DIY Kit, round IN-7 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

We've finally managed to secure a *small* quantity of IN-7 nixies and I've organised a few extra V1.5 printed coil PCBs to make use of them. This is the last time we expect the original version of the chessboard as seen in the 2012 videos to be available (though the electronics inside are newer). Supplied with 34x IN-7 and IN-7A nixies, through hole printed coil PCBs and all-brass bolts and thumbnuts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-7 (round) pieces – we also have an oval IN-15 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Nixie Chessboard DIY Kit, IN-15 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

Finally! After many months and redesigns (Again!) our V1.6 board is ready. Now using ready-made ferrite inductors and with all-through hole assembly. Finally no more surface mount parts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-15 (oval) pieces – we also have a round IN-7 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Nixie Chessboard DIY Kit, round IN-7 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

We've finally managed to secure a *small* quantity of IN-7 nixies and I've organised a few extra V1.5 printed coil PCBs to make use of them. This is the last time we expect the original version of the chessboard as seen in the 2012 videos to be available (though the electronics inside are newer). Supplied with 34x IN-7 and IN-7A nixies, through hole printed coil PCBs and all-brass bolts and thumbnuts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-7 (round) pieces – we also have an oval IN-15 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Nixie Chessboard DIY Kit, IN-15 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

Finally! After many months and redesigns (Again!) our V1.6 board is ready. Now using ready-made ferrite inductors and with all-through hole assembly. Finally no more surface mount parts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-15 (oval) pieces – we also have a round IN-7 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Nixie OXO board DIY Kit, round IN-7 Nixies Included

Note: This is a DIY construction kit, not a finished board. This kit will include the 9 nixie displays needed for assembly.

The first and only Nixie-powered OXO (tic-tac-toe / noughts and crosses) in the world.
No plugs, Induction coils power the pieces right through the board.
A neat desk toy which takes up much less space than our chessboard but still very playable.

Supplied with five '0' (zero) pieces and four 'X' (Plus) pieces, '0' goes first and then take turns placing pieces anywhere you want on the board, they'll light up as soon as you put them down.

Back in a new easier to build through hole part design with IN-4 and IN-7 nixies as the 'O', only 40 of this version will be made available due to the limited number of parts available. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Kit contents:

All PCBs and electronic components
4x IN7 nixies
5x IN4 nixies
10x Piece bases
Paxolin case parts and engraved board top - you'll need to fill in the engravings with a paint of your choice.
'Wall wart' power supply.

You'll need to supply sandpaper, paint for the engraved board and to colour the piece bases, basic tools including a good quality soldering iron and patience. You'll find the assembly instructions over at http://www.lasermad.com/forums/viewforum.php?f=26

Nixie Chessboard DIY Kit, round IN-7 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

We've finally managed to secure a *small* quantity of IN-7 nixies and I've organised a few extra V1.5 printed coil PCBs to make use of them. This is the last time we expect the original version of the chessboard as seen in the 2012 videos to be available (though the electronics inside are newer). Supplied with 34x IN-7 and IN-7A nixies, through hole printed coil PCBs and all-brass bolts and thumbnuts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-7 (round) pieces – we also have an oval IN-15 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Nixie OXO board DIY Kit, round IN-7 Nixies Included

Note: This is a DIY construction kit, not a finished board. This kit will include the 9 nixie displays needed for assembly.

The first and only Nixie-powered OXO (tic-tac-toe / noughts and crosses) in the world.
No plugs, Induction coils power the pieces right through the board.
A neat desk toy which takes up much less space than our chessboard but still very playable.

Supplied with five '0' (zero) pieces and four 'X' (Plus) pieces, '0' goes first and then take turns placing pieces anywhere you want on the board, they'll light up as soon as you put them down.

Back in a new easier to build through hole part design with IN-4 and IN-7 nixies as the 'O', only 40 of this version will be made available due to the limited number of parts available. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Kit contents:

All PCBs and electronic components
4x IN7 nixies
5x IN4 nixies
10x Piece bases
Paxolin case parts and engraved board top - you'll need to fill in the engravings with a paint of your choice.
'Wall wart' power supply.

You'll need to supply sandpaper, paint for the engraved board and to colour the piece bases, basic tools including a good quality soldering iron and patience. You'll find the assembly instructions over at http://www.lasermad.com/forums/viewforum.php?f=26

Nixie Chessboard DIY Kit, IN-15 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

Finally! After many months and redesigns (Again!) our V1.6 board is ready. Now using ready-made ferrite inductors and with all-through hole assembly. Finally no more surface mount parts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-15 (oval) pieces – we also have a round IN-7 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.

Nixie Chessboard DIY Kit, round IN-7 Nixies Included

Note: This is a DIY construction kit, not a finished board (the board is fairly simple to build, but you will still need to be confident soldering small parts). This kit will include all 32 nixie displays needed for assembly.

The first and only Nixie-powered chessboard in the world.
No plugs! Induction coils power the pieces right through the board.
A cool DIY project!

We've finally managed to secure a *small* quantity of IN-7 nixies and I've organised a few extra V1.5 printed coil PCBs to make use of them. This is the last time we expect the original version of the chessboard as seen in the 2012 videos to be available (though the electronics inside are newer). Supplied with 34x IN-7 and IN-7A nixies, through hole printed coil PCBs and all-brass bolts and thumbnuts.

No more days weeks spent winding coils, just assemble the PCBs and concentrate instead on an individual case finish for your board. Now includes a 12V power supply. Currently offered with IN-7 (round) pieces – we also have an oval IN-15 version of the board listed. Future options may be limited as stock runs out - remeber these tubes haven't been made since 1991.
The symbols used to depict each piece may vary from the photograph depending on the availability of nixies. These symbol nixie tubes are now in short supply and once they're gone, that's it. Game over.